University of Limerick Institutional Repository

Repurposing end of life notebook computers from consumer WEEE as thin client computers – a hybrid end of life strategy for the circular economy in electronics

DSpace Repository

Show simple item record

dc.contributor.advisor Fitzpatrick, Colin
dc.contributor.advisor McMahon, Muireann
dc.contributor.author Coughlan, Damian
dc.date.accessioned 2019-02-12T15:29:17Z
dc.date.available 2019-02-12T15:29:17Z
dc.date.issued 2018
dc.identifier.uri http://hdl.handle.net/10344/7580
dc.description peer-reviewed en_US
dc.description.abstract This PhD thesis presents an investigation into the feasibility of repurposing endof- life notebook computers as thin client computers. Repurposing is the identification of a new use for a product that can no longer be used in its original form and has the potential to become a hybrid re-use/recycling end-of-life strategy for suitable e-waste when direct reuse is not economically or technically feasible. In this instance, it was targeted to produce thin client computers using motherboards, processors and memory from used laptops while recycling all other components. Notebook computers are of interest for this type of strategy due to having a large environmental impact in manufacturing but often not having the option of direct reuse as they are prone to damage and experience a rapid loss of value over time. They also contain multiple critical raw materials with very low recycling rates. The notebook computers were sourced from Civic Amenity sites (CA) and originated from business-to-consumer (B2C) channels. A total of 246 notebook computers were collected and analysed. The paper outlines a methodology developed to identify, test, analyse, and dismantle suitable devices for repurposing. The steps undertaken were 1) Visual inspection, 2) Power-on test 3) Initialstage Functionality test, 4) Dismantling, 5) Post-dismantling testing, 6) Finalstage Functionality testing. The results from the developed methodology indicated that 9% of the notebook computers were suitable for repurposing as thin client computers. It recommends the following design changes to laptops that would support repurposing; 1) PCB mounted Fan and Heatsink assembly, 2) Eliminate daughter and I/O boards, 3) A separate Power Button assembly, 4) Reduction in size of the motherboard’s physical footprint. A streamlined lifecycle analysis based on Cumulative Energy Demand (CED) was undertaken to compare the impact of repurposed notebook computers with new thin client computers. The results indicated that there are significant potential savings to be made by extending lifetimes and offsetting the production of new thin client computers under a range of assumptions. en_US
dc.language.iso eng en_US
dc.publisher University of Limerick en_US
dc.subject notebook computers en_US
dc.subject repurposing en_US
dc.subject e-waste en_US
dc.title Repurposing end of life notebook computers from consumer WEEE as thin client computers – a hybrid end of life strategy for the circular economy in electronics en_US
dc.type info:eu-repo/semantics/doctoralThesis en_US
dc.type.supercollection all_ul_research en_US
dc.type.supercollection ul_published_reviewed en_US
dc.type.supercollection ul_theses_dissertations en_US
dc.contributor.sponsor IRC en_US
dc.rights.accessrights info:eu-repo/semantics/openAccess en_US


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search ULIR


Browse

My Account

Statistics