ULIR Home
→
Faculty of Science and Engineering
→
Departments Science and Engineering
→
School of Engineering
→
Browsing School of Engineering by Subject

Browsing School of Engineering by Subject "additive manufacturing"

Now showing items 1-9 of 9

Compressive behaviour of additively manufactured lattice structures: a review

Obadimu, Solomon O.; Kourousis, Kyriakos I. (MDPI, 2021)

Additive manufacturing (AM) technology has undergone an evolutionary process from fabricating test products and prototypes to fabricating end-user products—a major contributing factor to this is the continuing research ...
Constitutive modeling of additive manufactured Ti-6Al-4V cyclic elastoplastic behaviour

Kourousis, Kyriakos I.; Agius, Dylan J.; Wang, Chun H.; Subic, Aleksandar (Otto von Guericke Universitaet * Institut fuer Mechanik, 2016)

Metal additive manufacturing techniques have been increasingly attracting the interest of the aerospace and biomedical industry. A particular focus has been on high value and complexity parts and components, as there the ...
Cyclic plasticity of the as-built EOS maraging steel: preliminary experimental and computational results

Mooney, Barry; Agius, Dylan J.; Kourousis, Kyriakos I. (MDPI, 2020)

This short communication offers a preliminary view on ongoing research conducted on the as-built EOS maraging steel 300. The material’s cyclic elastoplastic characteristics under strain-controlled loading have been ...
Immersion ultrasonic testing of artificially induced defects in fused filament fabricated steel 316L

Obadimu, Solomon O.; McLaughlin, John; Kourousis, Kyriakos I. (Mary Ann Liebert, 2021)

Fused filament fabrication (FFF) with the use of metal-polymer filaments offers a cost-effective solution in additively manufacturing metal parts. Nevertheless, the quality and dimensional characteristics of the FFF produced ...
Plastic anisotropy of additively manufactured maraging steel: influence of the build orientation and heat treatments

Mooney, Barry; Kourousis, Kyriakos I.; Raghavendra, Ramesh (Elsevier, 2019)

This experimental study investigates the combined effect of the three primary Additive Manufacturing (AM) build orientations (0°, 45°, and 90°) and an extensive array of heat treatment plans on the plastic anisotropy of ...
Process phenomena influencing the tensile and anisotropic characteristics of additively manufactured maraging steel

Mooney, Barry; Kourousis, Kyriakos I.; Raghavendra, Ramesh; Agius, Dylan J. (Elsevier, 2019)

The tensile mechanical properties and anisotropy levels of identical test-coupons, fabricated from maraging steel 300 (MS300) using two alternative EOS EOSINT M280 Additive Manufacturing (AM) systems, have been examined. ...
A radiopaque nanoparticle-based ink using PolyJet 3D printing for medical applications

Shannon, Alice; O'Connell, Aine; O'Sullivan, Aidan; Byrne, Michael; Clifford, Seamus; O'Sullivan, Kevin Jeremiah; O'Sullivan, Leonard (Mary Ann Liebert, 2021)

The aim of this study was to develop a 3D printable radiopaque ink and successfully print a finished artifact. Radiopaque 3D printing would be hugely beneficial to improve the visibility of medical devices and implants, ...
A review of factors affecting the mechanical properties of maraging steel 300 fabricated via laser powder bed fusion

Mooney, Barry; Kourousis, Kyriakos I. (MDPI, 2020)

Maraging steel is an engineering alloy which has been widely employed in metal additive manufacturing. This paper examines manufacturing and post-processing factors aﬀecting the properties of maraging steel fabricated ...
A review of the as-built SLM Ti-6Al-4V mechanical properties towards achieving fatigue resistant designs

Agius, Dylan J.; Kourousis, Kyriakos I.; Wallbrink, Chris (MDPI, 2018)

Ti-6Al-4V has been widely used in both the biomedical and aerospace industry, due to its high strength, corrosion resistance, high fracture toughness and light weight. Additive manufacturing (AM) is an attractive method ...

Browsing School of Engineering by Subject "additive manufacturing"

DSpace Repository

Browsing School of Engineering by Subject "additive manufacturing"

Search ULIR

Browse

All of ULIR

This Collection

My Account

Statistics