University of Limerick Institutional Repository

Digital signal processor based controller for multi-rail DC-DC convertor systems

DSpace Repository

Show simple item record

dc.contributor.advisor Mahdi, Abdulhussain E
dc.contributor.advisor Halton, Mark
dc.contributor.author Mooney, James
dc.date.accessioned 2011-12-07T17:01:05Z
dc.date.available 2011-12-07T17:01:05Z
dc.date.issued 2011
dc.identifier.uri http://hdl.handle.net/10344/1680
dc.description peer-reviewed en_US
dc.description.abstract The widespread adoption of digital control has resulted in many improvements in low power switching mode power converters. Digital control has introduced alternative control laws and new features to previously analogue-controlled converters. It has also enhanced performance and cost factors in particular applications. This is evident in systems comprising of multiple ASICs, DSPs, memory devices, FPGAs, etc., which require multiple DC-DC converters. A single digital controller can perform the control for all of the DC-DC converters even though the specifications of each may be different. This thesis addresses fundamental issues in the architectural design and hardware implementation of a digital controller for such multi-rail systems. A review of conventional digital controllers indicates that they are not specifically optimised for multi-rail applications. In some cases existing digital signal processors are used, which have superfluous features to those required for the simple control task. In other cases fixed-algorithm controllers are used, which are unsuitable for applications having multiple converters with individual control algorithm requirements. A new digital signal processor core that overcomes the shortcomings of existing controllers has thus been designed, implemented and evaluated. The requirements of computational, memory and program control elements have been analysed in relation to the algorithms to be executed and the power converter system to be controlled, where linear compensators for multi-rail DC-DC converter systems are considered in particular. This analysis has led to the design of an instruction set and a corresponding dual-datapath architecture. The proposed processor has been implemented using an FPGA and verified in a closed-loop power converter system. The benefits of the specialised processor are illustrated in the thesis through a comparison with a conventional single datapath processor. Experimental results demonstrate improved performance over existing digital signal processor based controllers when controlling multiple DC-DC converters. In the case of multiple converters that have a non-integer switching frequency ratio more significant performance improvements are exhibited due to the processor’s novel interrupt controller. en_US
dc.description.sponsorship IRCSET
dc.language.iso eng en_US
dc.publisher University of Limerick en_US
dc.subject converter systems en_US
dc.subject digital signal en_US
dc.title Digital signal processor based controller for multi-rail DC-DC convertor systems en_US
dc.type Doctoral thesis en_US
dc.type.supercollection all_ul_research en_US
dc.type.supercollection ul_published_reviewed en_US
dc.type.supercollection ul_theses_dissertations en_US
dc.type.restriction none en


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Browse

My Account

Statistics